Hot Tapping Machines
BOOR 12-42
The BOOR 12-42 is a worm-driven, hydraulically powered hot tapping machine that can cut into live steel pipelines and tanks.
It is the perfect piece of equipment needed when maintenance, repairs or improvements are needed on a pipeline or tank without loss in production. As it allows work to continue without any interruption in current flow operations.
The BOOR 1000 can make cut sizes from 12” up to 42” with a reach of 108” and a maximum working pressure of 100Bar (see full specifications below). It is also used to install the BOOR manufactured completion plugs. It also comes with a fully functional ladder to gain access to controls while working.
The BOOR hydraulic power pack is available for purchase separately.
Technical Specifications:
| Tapping Range | 12” – 42” |
| Operating Pressure | 100 Bar (1480psi) at 38 deg ˚C |
| Sealing | Chevron gland rated 400 Bar @100 deg ˚C |
| Operating Product Temperature Range | -29 Deg ˚C to 371 Deg ˚C |
| Boring bar diameter | 140mm |
| Max travel | 108” |
| Transmission Mode | Hydraulic |
| Feed mode | Manual/Automatic |
| Feed rate | 0.12mm/rev |
| Weight | 1500Kg |
| Dimensions | 3904mm x 750mm x 994mm |
Technical Specifications Power Pack:
| Engine Power | Hatz 36HP, Diesel driven |
| Oil flow | 119L/min |
| Set Pressure | 1000psi |
| Hydraulic fluid capacity | 400L |
| Weight (Empty) | 500Kg |
| Dimensions | 2000mm x 1200mm x 1200mm |
Flyer